Buy at this store.See Detail Online And Read Customers Reviews Comp-M Mount Wilcox Industries prices over the online source See individuals who buy "Comp-M Mount Wilcox Industries" Make sure the shop keep your personal information private before you purchase Comp-M Mount Wilcox Industries Make sure you can proceed credit card online to buyComp-M Mount Wilcox Industries therefore the store protects your information from fraudulents Make sure the customer support is obviously there to help you when you place Comp-M Mount Wilcox Industries order with them

Content:

Comp-M Mount Wilcox Industries.

$130.99
Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series, 3XMAG ...

Product Description

Strong, Lightweight, Tactical Mount For Secure Attachment Of Comp Series Sights

Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series, 3XMAG magnifier, and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong, solid, yet lightweight mount. Four, steel, hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail Grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique, captive cross-bolt is divided lengthwise; one side provides a slop-free fit in a MIL-STD 1913 Picatinny slot, while rotating the bolt a half turn exposes the side that snugs into the narrower Weaver-type slot. An oversized thumb nut with deep grasping grooves lets the operator tighten the mount with hand pressure only; coin slot in the head lets you apply additional tightening force with a U.S. nickel or quarter.


AR-15, Issue:06, Page:073
Big Book Catalog, Issue:71, Page:274

SPECS: Aluminum, hardcoat anodized, matte black finish. Height measured from top of rail to bottom of scope tube: 1.120” (2.84cm). 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3, 3XMAG magnifier, and other optics that require a single 30mm ring mount.

Quick Detach Scope Mounts Midwest Industries, Inc..

$179.95
QD Scope Mounts Midwest Industries incorporates on of the smoothest functioning QD levers on the market. Extremely smooth in operation with ...

Product Description

QD Scope Mounts

Midwest Industries incorporates on of the smoothest functioning QD levers on the market. Extremely smooth in operation with a multi-facetted adjustment nut to get the exact tension required  without damaging the rail surface. Fully adjustable with no tools.

Weighing in at 8.4 oz, these mounts are precision machined for optimum return to zero performance and reliability. Hard coat anodized 6061 Aluminum for a lifetime of service. Works with scopes up to a56mm objective lens.

  • Works with scopes up to a 56mm Objective
  • Weight: 8.4 oz
  • Overall Length: 5.875"
  • Width of Rings: .85"
  • Distance between rings: 2.8"
  • Offset from the first ring: 1.4"
  • Height- top of rail to center line of ring: 1.5"

Ar-15/m16 Flattop Optic Mount J P Enterprises.

$170.95
One-piece, aluminum mount with integral rings is precision machined to true MIL-STD 1913 Picatinny specs for a secure fit on flattop receiver ...

Product Description

Integral Offset Rings For Rock-Solid Mounting

One-piece, aluminum mount with integral rings is precision machined to true MIL-STD 1913 Picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm and 34mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement.


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095
Sinclair, Issue:5B, Page:209

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 Torx wrenches. 1"/30mm - Approximately 5½" (14cm) long, 1¾" (4.4cm) wide, 21⁄8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), measured from top of receiver rail to bottom of scope. 34mm - 5¾" (14.6cm) long, 115⁄16" (4.9cm) wide, 2½" (6.3cm) overall height. 7 oz. (198g) weight. Height - .760" (1.9cm), measured from top of receiver rail to bottom of scope tube.

Recon-H Quick Detach Scope Mounts American Defense Manufacturing.

$186.49 - $186.99
ne-piece integral base and rings with dual-lever system provides a quick attach/detach platform for mounting optics onto flattop-style AR-15s. Extra-high cantilever mount ...

Product Description

Rock-Solid Mounts With Quick-Detach System

ne-piece integral base and rings with dual-lever system provides a quick attach/detach platform for mounting optics onto flattop-style AR-15s. Extra-high cantilever mount positions optics 2" forward, allowing you to get the eye relief you need. Precision machined from 6061 T6 aluminum and finished in hard coar T3 Mil-Spec anodize. Features ADM's Patented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems.
 


AR-15, Issue:11, Page:091
Big Book Catalog, Issue:71, Page:094

SPECS: 6061-T6 Aluminum, T3 mil-spec anodized, matte black. 8 oz (226g) wt. (all models). Heights measured from top of rail to centerline of scope tube. AD-RECON-H – 6” (15.2cm) OAL. 1” and 30mm model – 1-7⁄8” (4.7cm) height. 2½” (6.3cm ) space between rings.

Precision Optics Dual Lever Mounts Bobro Engineering.

$267.99 - $324.99
The Precision Optic Mount provides a rock solid, repeat zero scope interface for your weapon platform. It features the patent pending BLAC™lever ...

Product Description

The Precision Optic Mount provides a rock solid, repeat zero scope interface for your weapon platform. It features the patent pending BLAC™lever system which requires no manual adjustment to attain a proper, rock solid engagement on a 1913 Picatinny rail.The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Features dual BLAC Levers for 34mm and 35mm main tubes.