Please require a few moments to see the Precision Optics Dual Lever Mounts Bobro Engineering details and features. This producrs is High Quality and Fast Shipping for that store. Click on the link below to See Price, Product Description and Customer reviews for Shipping available within the USA.
You can order Precision Optics Dual Lever Mounts Bobro Engineering after check, compare the prices and check day for shipping. Some people are want to buy Precision Optics Dual Lever Mounts Bobro Engineering on the cheap price. While the item could possibly be priced similarly at different shops.
The price of product could possibly be change any time, so please check it and the caution before Pre–order prior to ordering for protect your right. reflexsights
Pricing information ofPrecision Optics Dual Lever Mounts Bobro Engineeringis provided through the listed merchants. The
- website just isn't responsible for your accuracy of pricing information, product information or perhaps the images provided. Product prices and availability are accurate by the date-time indicated and therefore are subject to change. Any price and availability information displayed on amazon.com and other merchants with the time of purchase will connect with the purchase with this product. As always, make sure to visit the merchant is site to review and verify product information, price, and shipping costs. The shopping store.
- website just isn't responsible to the content and opinions in customer submitted reviews.
Precision Optics Dual Lever Mounts Bobro Engineering.
The Precision Optic Mount provides a rock solid, repeat zero scope interface for your weapon platform. It features the patent pending BLAC™lever system which requires no manual adjustment to attain a proper, rock solid engagement on a 1913 Picatinny rail.The Precision Optic Mount is precision CNC machined from a block of 6061 T6 aluminum and finished in hard coat type 3 mil-spec anodized black for a rock hard lasting finish. Features dual BLAC Levers for 34mm and 35mm main tubes.
Ar-15 Super Precision Sopmod Certified Vortex 1-6 30mm Mount Geissele Automatics Llc.
Designed to Secure Your Precision Optic
The Geissele SOPMOD-Certified Super Precision Scope Vortex 1-6 Mount is perfect for any AR-15 platform needing a bombproof mounting surface for its optic, ensuring that accurate shots can be taken at any time without worrying about loss of zero.
The Geissele SOPMOD-Certified Super Precision Scope Vortex 1-6 Mount is part of the company's certified U.S. Special Operations Command-certified equipment line, and the SOPMOD program allows these special-operations troops to configure their gear to the specifications they desire for their mission requirements.
- Features black anodized finish
- Heights available: 1.54 and 1.93 inches
- Overall length: 2.76 inches
- Fits 30mm main tubes
Each Geissele SOPMOD-Certified Super Precision Scope Vortex 1-6 Mount has undergone aggressive testing by special-forces groups, and it is ready for any situation you can throw at it.
Big Book Catalog, Issue:71, Page:258
Mark 4 Ims 30mm Mount Leupold.
A Simple and Secure Way to Mount Your Favorite Optic on an AR
The Leupold Mark 4 IMS 30mm Mount is built from durable bar stock and provides a solid platform for mounting an optic on your AR. The IMS (Integral Mounting System) locks securely onto the Mil-Spec 1913/Picatinny rail of your rifle and can be removed and remounted without rezeroing.
- Specially-designed integral bases eliminate the need for risers
- No eye-relief issues; eliminates the need for short eye relief scopes
- Simply mark one location on your rail for rapid remounting and an instant return to zero
With the Leupold Mark 4 IMS 30mm Mount your AR rifle becomes even more versatile than before. In addition, these integral bases and rings are backed by Leupold’s Full Lifetime Warranty.
Scar Dual Lever Mounts Bobro Engineering.
Dual lever mount that was initially engineered for the FN SCAR weapon family. We also use this mount on Ar10/SR25 type weapons as the upper receiver is long enough to establish proper eye relief with most scopes. Levers can be configured on left or right side. We recommend levers on opposite side of cocking handle. If cocking handle is on the left for example, then order mount with “RR” suffix, meaning levers on the right. Left side levers will have the “LL” suffix. Can be configured with 30mm/34mm/35mm rings. Height- 1.5″ from top of rail to optic centerline. Weight 8.9 ounces. Ring spacing- 2.980″ inside to inside.
SPECS: Height measured from Top of rail to center of scope ring.
Ar-Pepr Quick Detach Mounts Burris.
One-piece cantilever mount with integral rings positions the optic almost 2" farther forward to provide extra clearance needed for a night vision device (NVD), add-on magnifier, or long eye relief scope. The “Proper Eye Position Ready” mount also features built-in, two-slot rails on the tops of the rings for convenient mounting of reflex sights or other accessories. Each top ring strap is secured with six Torx® screws to prevent recoil-induced slippage. Side locking bar with two, steel hex nuts and cross-bolts hold tight on any Picatinny receiver rail. Also available with quick-release lever attachment system.
AR-15, Issue:11, Page:091
Big Book Catalog, Issue:71, Page:095
Sinclair, Issue:5B, Page:205
SPECS: Aluminum, hardcoat anodized, matte black. 5.3" (13.5cm) long, 1.6" (4.1cm) wide, 2.4" (6.1cm) overall height. Height from top of rail to bottom of ring: 1" (2.5cm). 8.7 oz. (247g) weight. Fits scopes with 1" tube. Mounts to MIL-STD 1913 Picatinny rails.
Isms Quick Detach Qdp Cantilever Mounts Spuhr.
Gives You Plenty of Eye Relief With Sacrificing Stability
An extremely sturdy mount, the quick detach Spuhr QDP Cantilever Mount clamps directly to any MIL-STD 1913 Picatinny top rail or base, ensuring correct eye relief for your optic. Machined from a single billet of aluminum to resist flexing under recoil, mount has 45° split rings to eliminate the bulkiest part of the rings from your line of sight with the scope turrets.
- Includes 10° wedge to properly align the scope in the rings
- Allows scope to be mounted 1.57" farther forward
- 1.5" high, 5.94" OAL
Easy-to-operate quick-release levers let you attach and remove the Spuhr QDP Cantilever Mount from your rifle with the mount and the scope as a single unit.
Dual Dovetail Rifle Bases Leupold.
Absolutely The Strongest Base System Available
Leupold’s famous rotary dovetail rings in BOTH front AND rear bases; there’s no way a ring can shoot off its base. Ideal for large caliber, heavy kicking rifles that can throw a scope off easily, plus light caliber varmint rifles that need an absolutely rigid scope mount to make full use of the gun’s accuracy potential. Dual Dovetail Bases and Rings must be used together; will not interchange with other Leupold rings and bases. Rings and bases sold separately; select the correct base set for your rifle, then choose rings.Those marked “Rev. Frt.” have reversible front base to help get correct ring spacing.
Big Book Catalog, Issue:71, Page:266
Ar-15/m16 M-223 Scope Mount Nikon.
Forward Cantilever For Plenty Of Eye Relief; 20 MOA Model Available
The Nikon P-Series Scope Mount offers AR-15 owners a wide range of flexibility in their optics mounting, enabling them to select two different mounting points for front and rear rings, unlike one-piece optics mounts.
The Nikon P-Series Scope Mount uses a two-piece reversible design, which allows for use with a wide range of optics. The mounts can also be positioned at different points on the rail for added flexibility.
- Features flat-dark earth finish or black finish
- Height: 1.4 inches
- Fits 1-inch diameter tubes
- Designed for use with Picatinny rails
The Nikon P-Series Scope Mount also allows the charging handle on AR rifles to remain accessible.
AR-15, Issue:11, Page:099
AR-15, Issue:11, Page:100
Big Book Catalog, Issue:71, Page:096
Sinclair, Issue:5B, Page:183
SPECS: Aluminum, hardcoat anodized, matte black (MB), Realtree® Max-1® (Max) or Mossy Oak Brush® (Brush) camouflage. Steel mounting hardware, black oxide finish. 5" (12.7cm) O.A.L. 3½" (8.9cm) center-to-center ring spacing; 3.125" (8cm) between ring edges. Requires 3½" of rail space. 5.5 oz. wt.
Lr-Skel Extended Skeletonized Msr Mounts Warne Mfg. Company.
The LR-SKEL Mount offers 20 MOA built-in slope for long range precision shooting. This allows additional elevation adjustment in your optic when shooting ranges over 600 yards. The LR-SKEL Mount is CNC precision machined from 6061 aluminum and Warne has been able to reduce the weight by over 30%, compared to our R.A.M.P. Mount by utilizing a skeletonized body and ring caps. The LR-SKEL provides an additional inch of forward cantilever, compared to the original SKEL Mount to provide proper eye relief when using scopes with large eye boxes and gives extra space behind the mount for accessories like the Warne A645 45° side mount adapter.