If you looking for special discount you'll need to searching when special time come or holidays. Typing your keyword like Dloc-M4 Scope Mount Zro Delta Dloc-M4 Scope Mount Zro Delta Reviews : You finding where to buy Dloc-M4 Scope Mount Zro Delta for cheap best price. Get Cheap at best online store now!! Limited availability. shop Dloc-M4 Scope Mount Zro Delta looking for special discount
Dloc-M4 Scope Mount Zro Delta.
Keeps Your Scope in Place & Allows QD Operation With True Return-to-Zero Capability
ZRODelta’s DLOC-M4 cantilever scope mount grabs ahold of your modern sporting rifle’s Picatinny top rail and hangs on to it like two teenagers in love. This is the kind of quick-on-and-off mount busy AR-15 shooters love. With six crossbolts for recoil lugs and two spring-loaded clamping side bars, the DLOC-M4 is simple to attach.
Loosen the DLOC-M4’s nuts so the clamping bars can be pushed out, and since they’re under spring tension, they’ll automatically clamp down on your top rail with a vise-like grip that won’t let go. Finger-tighten the nuts, and you’re good to go - easy as pie and no tools required. Scope will maintain zero if taken off for storage or other purposes, providing true ‘Return to Zero’ accuracy when re-attached. Install your DLOC-M4 the way that works best for your needs: hand tighten the retention knobs for QD installation, or grab a wrench and tighten them to spec for a recoil-proof, non-QD installation.
- Six recoil lugs & 10 additional engagement points ensure the DLOC stays in place
- Precision machined, 6061 T6 aluminum body
- Type III hardcoat anodized, matte black
- Heavy-duty springs give solid retention & allow one-handed manipulation
- Positions centerline of scope 1.5" above rail
- Available with 30mm & 34mm rings
The ZRODelta DLOC-M4’s integral scope rings have an extra-wide contact area and four cap screws per ring to maintain a hold on the scope just as strong as this mount’s hold on the receiver rail. The cantilevered body allows forward mounting of even long scopes with plenty of eye relief for the shooter.
30mm Ar-Style Rifle Cantilever Scope Mount Brownells.
Everything You Need for a Secure Scope Installation on Your AR-Style Rifle
The Brownells AR-15 Cantilever Scope Mount is a true one-piece scope mounting solution for your AR-type "Modern Sporting Rifle." It positions the scope forward to give you plenty of eye relief, while it elevates the scope high enough for a comfortable head position and plenty of clearance for the objective bell.
Machined from a solid billet of 6061 T6 aluminum, our AR-15 Cantilever Scope Mount is lightweight, strong, and rigid. A pair of hardened steel 1/2" hex nuts provide tremendous locking force to ensure your mount - and the scope attached to it - stays in place. Remove the mount/scope unit from the rifle and reinstall it with little-to-no shift in the scope’s zero.
- Positions centerline of optic 1.4" above receiver - ideal for comfortable head position
- Fits scopes with 30mm tubes
- Attaches to standard Picatinny receiver rail slots
- Weighs only 7.5 oz.
- Proudly Made in the U.S.A.
A Brownells AR-15 Cantilever Scope Mount gives any 30mm scope you choose to mount on your rifle a solid, stable, secure platform that helps you enjoy the best performance from both rifle and optic.
Big Book Catalog, Issue:71, Page:256
Sport Cantilever Mounts Vortex Optics.
Use these cantilever mounts for mounting magnified optics onto flattop AR style rifles. The 2” and 3” offset of these cantilever mounts position the scope further forward, allowing the correct eye relief and head placement on AR style rifles. Aluminum construction.
The cantilever ring mount positions the center of the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
Precision Extended Cantilever Mounts Vortex Optics.
Available in 30mm and 34mm with options for a quick release or 20 MOA cants. These extended cantilevers are designed for mounting scopes with a forward location, providing correct eye relief and head placement. The cantilever ring mount positions the center of the riflescope tube at a height of 1.574” (40mm) from the base.
Recon-X Extended Scope Mounts American Defense Manufacturing.
Similar to the standard RECON, the RECON-X mount is made for putting high power glass onto a flattop style AR-15. The cantilever on the RECON-X provides extended eye relief over the standard RECON. At 3" of offset it proveds the longest built in eye relief of any ADM Mount. Precision machined from 6061 T6 Aluminum and finished in hard coat T3 Mil-Spec anodize. it features the Pantented QD Auto Lock Lever system to accommodate both in spec and out of spec rail systems
AR-15, Issue:11, Page:091
Big Book Catalog, Issue:71, Page:094
Dloc-Ba Low Profile Scope Mount Zro Delta.
Locks In Place, Even Before You Tighten the Screws
Designed specifically for bolt action rifles and other low profile applications, the ZRODelta DLOC-BA Low Profile Scope Mount gives you fast attachment and removal capabilities without the loss of zero. The one piece aluminum base, with integrated rings, eliminates the joint between the base and rings, ensuring a rigid platform that prevents the scope from kinking while reducing ring alignment problems.
Sixteen engagement points, plus six recoil lugs, along the full length base ensures the mount can get a solid bite on your top rail space for improved stability. Heavy duty springs inside the DLOC system clamps down tightly on the rail the instant slap it in place, so if you don’t get the mount quite tight enough during optic changes, this mount will still hang on to your rail with the tenacity of a rabid Pit Chihuahua.
- One piece, precision machined 6061-T6 aluminum body
- Top ring straps have four Torx head screws to hold the optics tight under heavy recoil.
- Can be mounted for left or right handed tightening access
- True return to zero capabilities
- Available with 30mm or 34mm rings
If scope needs to be removed, hand tightening knobs on the ZRODelta DLOC-BA Low Profile Scope Mount allow for quick detachment to access back up sighting system or secondary optic.
P-Tactical 1 Piece Scope Mount 1 Rings Nikon.
Secure One-Piece Mount for Your P-TAC Glass
Nikon’s P-TACTICAL scope mount is essentially their M-TACTICAL one-piece mount configured to accept the 1" tubes of their P-TACTICAL line of AR-15 / MSR scopes. Like its 30mm friendly cousin, the P-TACTICAL mount is available in standard, dead-flat (0 MOA) configuration or with built-in 20 MOA elevation that helps you land accurate long-range shots without exceeding your scope’s elevation adjustment.
Of course, the P-TACTICAL mount clamps to any AR-15 flattop receiver and provides optimum height and eye relief for your Nikon P-TACTICAL scope. It’s geared for AR-15 installations, but can easily be used with a wide variety of other optics with 1" O.D. tubes that call for an easy-to-install Picatinny mount.
- Built in 1" scope rings
- Two Allen head cap screws secure top ring halves
- Strong yet lightweight all-aluminum construction
- Durable matte black anodized finish to match your P-TACTICAL scope
- 0 MOA & 20 MOA models available
Nikon set up the P-TACTICAL scope mount with a cantilever that extends approximately 2" forward of the receiver to you can push your scope forward for plenty of eye relief - and also keep it from interfering with your access to the charging handle. Two steel cross-bolts and the full-length clamping bar secure the mount to any MIL-STD 1913 Picatinny receiver rail.
Flt Accucam Quick Detach Scope Mount Gg&g, Inc..
To meet the specific optic mounting needs of the SPR shooters, GG&G has introduced their FLT Scope Mount With 30mm Integral Rings.
For comparative purposes the SPR Scope Mount places the scope forward 1.5 inches more than the GG&G AC-30 Scope Mount. The FLT Mount is lightweight weighing in at only 5.5 ounces, and is 5 inches long. It is low profile allowing excellent cheek weld when mounted to the AR-15/M16 flattop upper receiver. The height from the centerline of the 30mm integral rings to the top of the dovetail mounting platform is 1.460 inches. The center to center dimension of the rings is 3.750 inches. Manufactured from 6061 T6 aluminum and Type III hard anodized matte black to mil-spec.
AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095
Sidelok 34mm Modular Optic Mount Kinetic Development Group Llc.
Versatile, Adaptable Truly Quick-Attach/Detach Scope Mount
KDG’s 34mm Sidelok Modular Optic Mount provides user-configurable options that made it one of the most versatile QD scope mounts available. Of course, you can quickly clamp it to any Picatinny receiver rail, then remove it just as fast, with one hand, simply by pressing the release button at the front. The Sidelok Optic Mount’s innovative locking system makes it virtually impossible to unintentionally release the mount. Cam lock system ensures the Sidelok will fit all Picatinny rails, even those that are out of spec.
The rings on the Sidelok Modular Optic Mount can moved forward or backward to avoid interference with objective bells, turret knobs, or magnification adjustment collars. They are CNC-machined and wire-EDM cut to be as precisely concentric as possible. Top- and bottom-halves are machined together, as a unit, and given
- Fully machined high-grade aluminum alloy
- Top & bottom halves machined together, as a unit, for best alignment
- Witness marks help the user keep the correct top mated to its matching bottom
- Type 3 hardcoat anodized, matte black
The rings on the KDG Sidelok Modular Optic Mount are removable, so you can swap rings to fit a different-diameter scope tube without having to buy a whole new mount.
Big Book Catalog, Issue:71, Page:259