Dloc-Ba Low Profile Scope Mount Zro Delta Reviews : Best Price!! Where I Can Get Online Clearance Deals on Dloc-Ba Low Profile Scope Mount Zro Delta Save More!
 
Content:

Dloc-Ba Low Profile Scope Mount Zro Delta.

$251.99
Designed specifically for bolt action rifles and other low profile applications, the ZRODelta DLOC-BA Low Profile Scope Mount gives you fast attachment ...

Product Description

Locks In Place, Even Before You Tighten the Screws

Designed specifically for bolt action rifles and other low profile applications, the ZRODelta DLOC-BA Low Profile Scope Mount gives you fast attachment and removal capabilities without the loss of zero. The one piece aluminum base, with integrated rings, eliminates the joint between the base and rings, ensuring a rigid platform that prevents the scope from kinking while reducing ring alignment problems.

Sixteen engagement points, plus six recoil lugs, along the full length base ensures the mount can get a solid bite on your top rail space for improved stability. Heavy duty springs inside the DLOC system clamps down tightly on the rail the instant slap it in place, so if you don’t get the mount quite tight enough during optic changes, this mount will still hang on to your rail with the tenacity of a rabid Pit Chihuahua.

  • One piece, precision machined 6061-T6 aluminum body
  • Top ring straps have four Torx head screws to hold the optics tight under heavy recoil.
  • Can be mounted for left or right handed tightening access
  • True return to zero capabilities
  • Available with 30mm or 34mm rings

If scope needs to be removed, hand tightening knobs on the ZRODelta DLOC-BA Low Profile Scope Mount allow for quick detachment to access back up sighting system or secondary optic.
 

P-Tactical 1 Piece Scope Mount 1 Rings Nikon.

$69.99 - $74.99
Nikon’s P-TACTICAL scope mount is essentially their M-TACTICAL one-piece mount configured to accept the 1" tubes of their P-TACTICAL line of AR-15 ...

Product Description

Secure One-Piece Mount for Your P-TAC Glass

Nikon’s P-TACTICAL scope mount is essentially their M-TACTICAL one-piece mount configured to accept the 1" tubes of their P-TACTICAL line of AR-15 / MSR scopes. Like its 30mm friendly cousin, the P-TACTICAL mount is available in standard, dead-flat (0 MOA) configuration or with built-in 20 MOA elevation that helps you land accurate long-range shots without exceeding your scope’s elevation adjustment.

Of course, the P-TACTICAL mount clamps to any AR-15 flattop receiver and provides optimum height and eye relief for your Nikon P-TACTICAL scope. It’s geared for AR-15 installations, but can easily be used with a wide variety of other optics with 1" O.D. tubes that call for an easy-to-install Picatinny mount.

  • Built in 1" scope rings
  • Two Allen head cap screws secure top ring halves
  • Strong yet lightweight all-aluminum construction
  • Durable matte black anodized finish to match your P-TACTICAL scope
  • 0 MOA & 20 MOA models available

Nikon set up the P-TACTICAL scope mount with a cantilever that extends approximately 2" forward of the receiver to you can push your scope forward for plenty of eye relief - and also keep it from interfering with your access to the charging handle. Two steel cross-bolts and the full-length clamping bar secure the mount to any MIL-STD 1913 Picatinny receiver rail.
 

Flt Accucam Quick Detach Scope Mount Gg&g, Inc..

$173.99
To meet the specific optic mounting needs of the SPR shooters, GG&G has introduced their FLT Scope Mount With 30mm Integral Rings. ...

Product Description

To meet the specific optic mounting needs of the SPR shooters, GG&G has introduced their FLT Scope Mount With 30mm Integral Rings.

For comparative purposes the SPR Scope Mount places the scope forward 1.5 inches more than the GG&G AC-30 Scope Mount. The FLT Mount is lightweight weighing in at only 5.5 ounces, and is 5 inches long. It is low profile allowing excellent cheek weld when mounted to the AR-15/M16 flattop upper receiver. The height from the centerline of the 30mm integral rings to the top of the dovetail mounting platform is 1.460 inches. The center to center dimension of the rings is 3.750 inches. Manufactured from 6061 T6 aluminum and Type III hard anodized matte black to mil-spec.


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095

Sidelok 34mm Modular Optic Mount Kinetic Development Group Llc.

$209.24
KDG’s 34mm Sidelok Modular Optic Mount provides user-configurable options that made it one of the most versatile QD scope mounts available. Of ...

Product Description

Versatile, Adaptable Truly Quick-Attach/Detach Scope Mount

KDG’s 34mm Sidelok Modular Optic Mount provides user-configurable options that made it one of the most versatile QD scope mounts available. Of course, you can quickly clamp it to any Picatinny receiver rail, then remove it just as fast, with one hand, simply by pressing the release button at the front. The Sidelok Optic Mount’s innovative locking system makes it virtually impossible to unintentionally release the mount. Cam lock system ensures the Sidelok will fit all Picatinny rails, even those that are out of spec.

The rings on the Sidelok Modular Optic Mount can moved forward or backward to avoid interference with objective bells, turret knobs, or magnification adjustment collars. They are CNC-machined and wire-EDM cut to be as precisely concentric as possible. Top- and bottom-halves are machined together, as a unit, and given

  • Fully machined high-grade aluminum alloy
  • Top & bottom halves machined together, as a unit, for best alignment
  • Witness marks help the user keep the correct top mated to its matching bottom
  • Type 3 hardcoat anodized, matte black

The rings on the KDG Sidelok Modular Optic Mount are removable, so you can swap rings to fit a different-diameter scope tube without having to buy a whole new mount.


Big Book Catalog, Issue:71, Page:259