96 & 98 Mauser S&k is best in online store. I will call in short word as 96 & 98 Mauser S&k For people who are seeking 96 & 98 Mauser S&k review. We have additional information about Detail, Specification, Customer Reviews and Comparison Price. I would like recommend that you always check the latest price before buying.
Compare prices and intensely nice 96 & 98 Mauser S&k . and internet store for each and every occasion. take now for the utmost custom of 96 & 98 Mauser S&k with shop nearby your home. You can truck this item with cheap price from online shopping web site. Much more customer reviews tell that the 96 & 98 Mauser S&k are good quality item and it is also reasonably priced. You cangain96 & 98 Mauser S&k on-line shopping store. Prior to shop for you can verify for price, shipping price and more.
96 & 98 Mauser S&k.
Easily Add A Scope To Bolt & Semi-Auto, Military & Sporter Models For Mini-14, M1A/M14, Krag, M1 Carbine, Enfield, SKS-TYPE 56, Springfield 03A3, Garand, Mosin Nagant, Schmidt Rubin
Tough, light aluminum mount clamps securely to receiver; no drilling or tapping required. Fits bent bolt models only, others will require bolt modification. Includes S&K rings. Requires minor stock modification.
Big Book Catalog, Issue:71, Page:267
Ar-15/m16 Quick-Detach Optic Mount Noveske Rifleworks Llc.
Cantilever Mount For Optics, Magnifiers Or Night Vision Devices
Extended cantilever mount provides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs, swing both levers open, and the mount easily lifts off the rifle. Cross bars can be adjusted to fit almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator’s preference. Five, heavy duty steel hex head screws (three on top, two on bottom) clamp the 30mm vertically split ring halves together.
AR-15, Issue:11, Page:093
Big Book Catalog, Issue:71, Page:096
SPECS: 6061 T6 aluminum, Type III mil-spec hardcoat anodized finish, flat dark earth. Steel cross bars, matte black. 6" (15.2cm) O.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance between rings: 2½" (6.3cm.). 7.1 ounces (201g) weight.
Sniper Lightweight Integrator Combat Kit Badger Ordnance.
For Secure Mounting of Supplemental Sighting Accessories to Your Spotting Scope
Badger Ordnance’s SLICK - Sniper’s Lightweight Integrator Combat Kit - sets the serious, long-range tactical shooter up to mount a ton of accessories to a Leupold Mark 4 Spotting Scope. Multiple Picatinny rails on the SLICK’s mounting cage provide plenty of real estate for attaching a laser aiming system, laser range finders, inline night vision device, thermal sighting systems, even micro red dot sights - and any combination of these accessories.
- For use with Leopold Mark 4 spotting scope only
- Constructed of sturdy yet lightweight 6061 T6 aluminum alloy
- Military Type III hardcoat anodized finish
- Includes all necessary mounting hardware
- Spotting scope NOT included - we do sell them separately!
Adding the bare minimum of extra bulk to your Mark 4 spotter, the streamlined Badger Ordnance SLICK can be re-configured quickly for different combinations of accessories to meet your shooting needs of the moment.
Mark 6 Ims 35mm Integral Mounting System Leupold.
Looking for the perfect optics mount for your AR-15? Look no further than the Leupold Mark 6 IMS 35mm Integral Mounting System. This platform-specific mounting design addresses optics height and eye relief, two commonly seen issues with mounting optics to the AR platform. The mount attaches directly to any standard Picatinny rail and is machined from durable aluminum and given a matte-black finish.
Ar-15/m16 Flattop Scope Mount M & A Parts.
Integrated Mount & Rings For Rugged Strength
One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies.
AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:096
SPECS: Aluminum, hardcoat anodized, black, matte finish. 5-1⁄8" (13cm) O.A.L.. Height measured from top of rail to bottom of ring. 1” - 1.18” (2.99cm) high, 10.7 oz. (303g) weight; 30mm - 1.14” (2.89cm); 10 oz. (283.5g) weight.
Dloc-Rmr 45 Degree Mount Zro Delta.
Offset Mount Puts Red Dot Sight Beside Main Optic & Ready For Action
The ZRODelta DLOC-RMR 45 Degree Mount provides the perfect way to mount a red dot sight alongside your primary optic for quick targeting in close quarter engagements. Offset adaptor lets you switch from the primary, magnified optic to red dot action— without shifting your head – just a quick twist of the rifle!
Boasting six engagement points and three recoil lugs, the DLOC system grabs on to plenty of rail for a solid, secure fit. Heavy duty springs in the side bar clamp down the instant you attach the mount to your rail, giving you the freedom of positioning the mount with just one hand. Then just give the retention knob a few turns and the mount is locked in place - and it won’t rattle loose from abuse in the filed or heavy recoil! And since the optic remains on the mount, you can take it off your rifle and it will “Return to Zero” when reattached.
- Fits the Trijicon RMR
- Mount fits right or left side of the weapon
- Extreme grip means just hand tightening the retention knob keeps mount in place
- Designed for quick detachment / attachment
- Tightening knob allows for hand tightening to rail without worry of mount integrity
The ZRODelta DLOC-RMR 45 Degree Mount is great to have on your rifle for those situations when you need a little extra versatility in your targeting.
30mm Recon Unimounts Badger Ordnance.
Monolithic Mount Syncs Your Scope With Clip-On NVDs & Thermal Imagers
The Badger Ordnance 30mm Recon UniMount is designed specifically to co-witness your scope with clip-on night vision and thermal/fusion devices. The 30mm Recon UniMount has extra forward offset to make it easy for you to use it with low-magnification and long eye relief optics.
- Clamps to any MIL-STD 1913 Picatinny rail
- 0 MOA - no built-in elevation
- Machined 6061 T6 aluminum, mil-spec hardcoat anodized, matte black
- Hardened steel crossbolts & hex nuts for an extra-secure installation
The Badger Ordnance 30mm Recon UniMount is a sturdy, one-piece mounting solution built to withstand heavy recoil and hand the knocks and bruises of tactical operations.
T-Series Cantilever Mount Steiner Optics.
Each Steiner Optics T-Series Cantilever Mount makes it possible for owners of the popular AR-15 platform to have a secure mounting point for their go-to rifle optic. The mount is machined from durable aluminum alloy for lightness and durability and features a hardcoat-anodized matte-black finish for glare reduction and added protection.