Buy Cheap Ar-15/m16 Quick-Detach Optic Mount Noveske Rifleworks Llc Nonetheless, I hope until this reviews about it Ar-15/m16 Quick-Detach Optic Mount Noveske Rifleworks Llc will possibly be useful. And hope I'm a section of helping you to get a greater product. You will receive a review and practical knowledge form here. I hope you will ensure and purchase among Ar-15/m16 Quick-Detach Optic Mount Noveske Rifleworks Llc right after read this review

 

Content:

Ar-15/m16 Quick-Detach Optic Mount Noveske Rifleworks Llc.

$199.99
Extended cantilever mount provides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting ...

Product Description

Cantilever Mount For Optics, Magnifiers Or Night Vision Devices

Extended cantilever mount provides plenty of eye relief to mount a 30mm scope, or position a magnifier, night vision device, or other sighting accessory behind the main optic. Two quick-release levers clamp to a flattop receiver rail with unique cam action for a tight hold during recoil. Depress the locking tabs, swing both levers open, and the mount easily lifts off the rifle. Cross bars can be adjusted to fit almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Levers may be positioned to open to the front or the rear to suit the operator’s preference. Five, heavy duty steel hex head screws (three on top, two on bottom) clamp the 30mm vertically split ring halves together.


AR-15, Issue:11, Page:093
Big Book Catalog, Issue:71, Page:096

SPECS: 6061 T6 aluminum, Type III mil-spec hardcoat anodized finish, flat dark earth. Steel cross bars, matte black. 6" (15.2cm) O.A.L. Requires 4" (10.2cm) of rail space. Height measured from top of rail to bottom of scope body: .87" (2.2cm) high. Distance between rings: 2½" (6.3cm.). 7.1 ounces (201g) weight.

Sniper Lightweight Integrator Combat Kit Badger Ordnance.

$519.99
Badger Ordnance’s SLICK - Sniper’s Lightweight Integrator Combat Kit - sets the serious, long-range tactical shooter up to mount a ton of ...

Product Description

For Secure Mounting of Supplemental Sighting Accessories to Your Spotting Scope

Badger Ordnance’s SLICK - Sniper’s Lightweight Integrator Combat Kit - sets the serious, long-range tactical shooter up to mount a ton of accessories to a Leupold Mark 4 Spotting Scope. Multiple Picatinny rails on the SLICK’s mounting cage provide plenty of real estate for attaching a laser aiming system, laser range finders, inline night vision device, thermal sighting systems, even micro red dot sights - and any combination of these accessories.

  • For use with Leopold Mark 4 spotting scope only
  • Constructed of sturdy yet lightweight 6061 T6 aluminum alloy
  • Military Type III hardcoat anodized finish
  • Includes all necessary mounting hardware
  • Spotting scope NOT included - we do sell them separately!

Adding the bare minimum of extra bulk to your Mark 4 spotter, the streamlined Badger Ordnance SLICK can be re-configured quickly for different combinations of accessories to meet your shooting needs of the moment.

Mark 6 Ims 35mm Integral Mounting System Leupold.

$136.99 - $269.99
Looking for the perfect optics mount for your AR-15? Look no further than the Leupold Mark 6 IMS 35mm Integral Mounting System. ...

Product Description

Looking for the perfect optics mount for your AR-15? Look no further than the Leupold Mark 6 IMS 35mm Integral Mounting System. This platform-specific mounting design addresses optics height and eye relief, two commonly seen issues with mounting optics to the AR platform. The mount attaches directly to any standard Picatinny rail and is machined from durable aluminum and given a matte-black finish.

Ar-15/m16 Flattop Scope Mount M & A Parts.

$49.99 - $53.99
One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver ...

Product Description

Integrated Mount & Rings For Rugged Strength

One-piece mount provides strong, secure scope attachment that withstands the bumps and knocks of hard tactical use. Positions scope well above flattop receiver for easy heads-up aiming. Each ring is 11/8" long for maximum contact with scope body, and caps have four hex head clamping screws for recoil-proof holding power. Two, steel, thumb screws and full-length clamping bar securely lock mount to Picatinny receiver rail. Rounded contours and radiused edges resist snagging on other gear. Machined aluminum keeps weight to a minimum. Models available to fit 1" and 30mm scope bodies.


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:096

SPECS: Aluminum, hardcoat anodized, black, matte finish. 5-1⁄8" (13cm) O.A.L.. Height measured from top of rail to bottom of ring. 1” - 1.18” (2.99cm) high, 10.7 oz. (303g) weight; 30mm - 1.14” (2.89cm); 10 oz. (283.5g) weight.

Dloc-Rmr 45 Degree Mount Zro Delta.

$134.99
The ZRODelta DLOC-RMR 45 Degree Mount provides the perfect way to mount a red dot sight alongside your primary optic for quick ...

Product Description

Offset Mount Puts Red Dot Sight Beside Main Optic & Ready For Action

The ZRODelta DLOC-RMR 45 Degree Mount provides the perfect way to mount a red dot sight alongside your primary optic for quick targeting in close quarter engagements. Offset adaptor lets you switch from the primary, magnified optic to red dot action— without shifting your head – just a quick twist of the rifle!

Boasting six engagement points and three recoil lugs, the DLOC system grabs on to plenty of rail for a solid, secure fit. Heavy duty springs in the side bar clamp down the instant you attach the mount to your rail, giving you the freedom of positioning the mount with just one hand. Then just give the retention knob a few turns and the mount is locked in place - and it won’t rattle loose from abuse in the filed or heavy recoil! And since the optic remains on the mount, you can take it off your rifle and it will “Return to Zero” when reattached.

  • Fits the Trijicon RMR
  • Mount fits right or left side of the weapon
  • Extreme grip means just hand tightening the retention knob keeps mount in place
  • Designed for quick detachment / attachment
  • Tightening knob allows for hand tightening to rail without worry of mount integrity

The ZRODelta DLOC-RMR 45 Degree Mount is great to have on your rifle for those situations when you need a little extra versatility in your targeting.

 

30mm Recon Unimounts Badger Ordnance.

$229.99
The Badger Ordnance 30mm Recon UniMount is designed specifically to co-witness your scope with clip-on night vision and thermal/fusion devices. The 30mm ...

Product Description

Monolithic Mount Syncs Your Scope With Clip-On NVDs & Thermal Imagers

The Badger Ordnance 30mm Recon UniMount is designed specifically to co-witness your scope with clip-on night vision and thermal/fusion devices. The 30mm Recon UniMount has extra forward offset to make it easy for you to use it with low-magnification and long eye relief optics.

  • Clamps to any MIL-STD 1913 Picatinny rail
  • 0 MOA - no built-in elevation
  • Machined 6061 T6 aluminum, mil-spec hardcoat anodized, matte black
  • Hardened steel crossbolts & hex nuts for an extra-secure installation

The Badger Ordnance 30mm Recon UniMount is a sturdy, one-piece mounting solution built to withstand heavy recoil and hand the knocks and bruises of tactical operations.

T-Series Cantilever Mount Steiner Optics.

$299.99
Each Steiner Optics T-Series Cantilever Mount makes it possible for owners of the popular AR-15 platform to have a secure mounting point ...

Product Description

Each Steiner Optics T-Series Cantilever Mount makes it possible for owners of the popular AR-15 platform to have a secure mounting point for their go-to rifle optic. The mount is machined from durable aluminum alloy for lightness and durability and features a hardcoat-anodized matte-black finish for glare reduction and added protection.

Twistmount For 3x Magnifier Aimpoint.

$32.00 - $200.00
Quick-detach mount for Aimpoint 3x Magnifier lets you change instantly from long-range to CQB shooting modes. Simply depress the release lever, twist the ...

Product Description

Quick-detach mount for Aimpoint 3x Magnifier lets you change instantly from long-range to CQB shooting modes. Simply depress the release lever, twist the Magnifier, and lift it off for an unencumbered close-range sight picture. Low-profile base clamps Picatinny-style rail; extra-long scope ring provides ample surface contact area for a no-slip grasp on the magnifier body. May also be used as a quick-detach mount for other 30mm optics. Extra TwistMount bases sold separately, so you can quickly move your Magnifier from one rifle to another. Co-Witness Spacer (available separately) raises sight axis for proper co-witnessing with factory-height backup iron sights. Blends smoothly into contours of mount for a streamlined one-piece appearance. Comes with four, extra-length hex head screws and Allen wrench.


AR-15, Issue:11, Page:097
Big Book Catalog, Issue:71, Page:277

SPECS: Aluminum, hardcoat anodized, matte black.

Trg, Tikka T3x Direct Isms Mount Spuhr.

$410.00
The ISMS (Ideal Scope Mount System) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to ...

Product Description

The ISMS (Ideal Scope Mount System) is an extremely sturdy scope mount, with the possibility to attach multiple optical accessories directly to the mount. Built-in scope level and 45-degree split of the rings provides unobstructed view of your optics knobs. The durable design of the mounts prevents damage to the scope due to flexing during heavy recoil. The rings are grooved on the inside for better grip and the mount base is milled from a single billet of aluminum. Features direct mounting to TRG integral scope rails. Will fit the Tikka T3x without modifications. Older style T3’s may require slight modifications to the ejection port (opening it approx. 1/10” downwards).

Mounts include an innovative tool to index your scope properly to the mount and gun. Mounts have a minimum of 7 interfaces for accessories to be mounted. The rings are cut at a 45 degree angle instead of horizontally, providing several advantages; the screws holding the parts together are not obscuring the optics knobs, it gives the shooter a horizontal reference line helping the shooter avoid canting the rifle. Mount level is built into the bottom rear of the mount enabling the shooter a quick, accurate means to insure he avoids canting the rifle.


Big Book Catalog, Issue:71, Page:260