Shop for cheap price Isms Angle Cosign Indicator Interface Spuhr .Compare Price and Options of Isms Angle Cosign Indicator Interface Spuhr from variety stores in usa. products sale.
"Today, if you do not want to disappoint, Check price before the Price Up.Isms Angle Cosign Indicator Interface Spuhr You will not regret if check price." Isms Angle Cosign Indicator Interface Spuhr under $50
Isms Angle Cosign Indicator Interface Spuhr.
The "Ideal Scope Mount System" have interface surfaces directly on the mount, making it possible to mount accessories either by picatinny rails or as direct interfaces. These attach an ACI mount directly to your SPUHR Mounts or Rings. Either in Quick Detach or no Quick Detach versions.
Big Book Catalog, Issue:71, Page:260
Dloc-Deltapoint Pro 1/3 Co-Witness Optic Mount Zro Delta.
Grabs the Rail & Won t Let Go
Grabbing more rail than most other mounts, the ZRODelta DLOC mount for the Leupold DeltaPoint Pro sight is outfitted with 10 engagement points, including three recoil lugs for a solid lock on your rifle’s top rail. Simple to attach: just loosen the finger nut, push out the clamping bar, and install the DLOC on the rail. Since the bar is under spring tension, it sticks on your top rail like a tongue to a metal flagpole in the middle of a blizzard! Tighten the screw by hand for solid retention with QD capability, or grab a wrench and tighten it to spec for a non-QD installation.
- Accepts the Leupold DeltaPoint Pro using sight’s factory mounting screws
- Positions optic at the correct height for optimum viewing
- Allows lower 1/3 co-witness of DeltaPoint with AR-15 "iron" sights
- Machined 6061 T6 aluminum construction
- Type III hardcoat anodized matte black
- Designed to allow for quick detachment/attachment
The ZRODelta DLOC mount for your Leupold DeltaPoint Pro ensures the optic will have a true “Return to Zero” when you take it off the gun and then re-attach it later on.
Encore Rings & Base Talley.
Lightweight, Durable & Practical
One-piece ring and base eliminates the joint between the ring and base to provide a rigid mounting platform that reduces ring alignment problems and prevents kinking a scope. Surprisingly lightweight yet durable, machined from high-grade aluminum, these rings won’t add a lot of extra weight that can bog you down at the range or in the field. Accepts 1" diameter scope tubes.
Big Book Catalog, Issue:71, Page:266
SPECS: Extruded, CNC machined 7000 series aluminum, black. Fits scopes with 1" diameter tubes. Low - fits scopes up to 44 mm objective with standard barrel contour. Medium - fits scopes up to 50 mm objective with standard barrel contour. High - fits scopes with a 56 mm objective with standard barrel contour.
Sr-25 Super Precision Sopmod Certified Schimdt & Bender 34mm Moun Geissele Automatics Llc.
Secure Your High-Quality Optic
The Geissele SOPMOD-Certified Schmidt & Bender Super Precision Scope Mount enables owners and operators of these high-dollar, high-quality optics to mount them onto their firearms platform with a purpose-built mount designed specifically for that exact optic.
The Geissele SOPMOD-Certified Schmidt & Bender Super Precision Scope Mount was developed and rigorously tested as part of the government's SOPMOD program for U.S. Special Operations troops, allowing them to use these bombproof mounts on their weapons, should the mission requirements demand it.
- Black anodized finish
- Height: 1.54 inches
- Length: 2.76 inches
- Fits 34mm Schmidt & Bender optics
The Geissele SOPMOD-Certified Schmidt & Bender Super Precision Scope Mount is trusted by elite troops in the American military, so it can withstand any rugged environment and come out the other side without a hitch.
Big Book Catalog, Issue:71, Page:258
Ar-15/m16 Accu-Rizer Flattop Scope Mount Wilson Combat.
For Quick Detach/Reattach Of Scope Without Loss Of Zero
One-piece riser mount with integral rings provides additional elevation from top of rail to centerline of ring to ensure a proper cheek weld. Precision machined from aluminum bar stock for a secure fit on flattop receiver rail. Scope and mount form a single unit for fast attachment and removal without loss of zero. Mounts by hand tightening the oversized thumb screw to clamp the locking plate. The captive, spring-loaded locking plate maintains a positive mechanical connection that resists loosening under shock and vibration. Four hardened Torx®-head screws clamp each ring cap to the lower half. Models available for scopes with 1" or 30mm diameter bodies. 1" and 30mm model’s forward cantilever lets the scope overhang the front of the receiver to ensure plenty of eye relief.
AR-15, Issue:11, Page:093
Big Book Catalog, Issue:71, Page:096
SPECS: Aluminum, hardcoat anodized, black. Approx. 5" (12.7cm) long, 17⁄8" (4.8cm) wide. Approx. 8 oz. (227g) weight. 1" - Height from top of base to inside bottom of ring: 1.2" (30.5mm). 30mm - Height from top of base to inside bottom of ring: 1" (2.5mm).
K5 Mount For 5000 Series Kestrel Weather Meters Badger Ordnance.
View the Target & Weather Data Without Moving Your Head
Badger Ordnance’s K5 Mount for Kestrel weather meters clamps to your spotting scope, so you can easily read weather data from behind the scope without changing positions.
The K5 Mount attaches firmly to Picatinny rails at the 3 or 9 o’clock position on your scope (rails not included). Pop the Kestrel into the mount, and it is held securely so it will NOT fall out.
- K5 accepts 5000 Series Kestrel weather meters only
- Made of light, tough, durable reinforced 2200-series polyamide
- Coyote tan color
The Badger Ordnance K5 Mount for Kestrel weather meters clamps to the scope’s Picatinny rail via a simple setscrew; a knurled head makes the screw easy to grasp for initial finger-tightening before you tighten it down for good.
See-Thru Mounts Weaver.
Integral Mount Lets You Use Both Iron Sight And Scope
Extra wide oval opening below the scope allows fast, unrestricted use of iron sights when you're too close to use a scope. All steel, four screw top strap gives 210° surface contact for recoil-proof strength. Integral aluminum base means lighter weight.
Big Book Catalog, Issue:71, Page:274
SPECS: 1" (2.5cm) I.D. Overall height approximately 2" (5.1cm). 3 oz. (85g) per pair. Aluminum lower half, steel cap and screws. Satin blue or brushed stainless finish.
X-Treme Duty Ultralite Service Rifle Unimount Nightforce.
Designed for those who shoot with the nose-to-charging handle setup, the Nightforce X-Treme Duty Ultralite Service Rifle Unimount offers the right eye relief and optics setup for your go-to AR-15 sight.
The matte-black mount is designed for optics with a 30mm main-body tube and attaches to any standard Picatinny rail. Height from the flattop receiver measures 1.35 inches.
Promotional Codes are not applicable to Nightforce products.
X-Skel 30mm Msr Cantilever Mount Warne Mfg. Company.
Based on Warne's innovative R.A.M.P. Mount platform, this Gen II Edition has all the features you need. The X-SKEL Mount offers a lightweight scope mounting solution for your MSR style firearm with the same durable, return to zero reputation that you’ve come to expect from Warne. This mount is CNC precision machined from 6061 aluminum and we’ve been able to reduce the weight by over 30%, compared to their R.A.M.P. Mount, by utilizing a skeletonized body and ring caps. The X-SKEL provides an additional inch of forward cantilever, compared to the original SKEL Mount, as well as a 1 piece side clamp design for additional strength. The extra cantilever provides proper eye relief when using scopes with large eye boxes and will give extra space behind the mount for accessories like the Warne 45° side mount adaptor.
- Lightweight, skeletonized aluminum body and caps to reduce overall weight without sacrificing reliability.
- #8 Torx style fasteners with steel threaded inserts to prevent stripping.
- Additional 1 Inch cantilever forward design to provide additional eye relief.
- Places your optic at the Ideal Height for MSR and similar platforms.
- Dual 1/2″ tactical nut attachment, 65 in/lb. of torque is recommended.