If you find product , Deals.If at the time will discount more Savings So you already decide you want have Ak Quick Detach Scope Mount Gg&g, Inc. for your, but you don't know where to get the best price for this Ak Quick Detach Scope Mount Gg&g, Inc. . We already done the research and spend a lot of time for you. Ak Quick Detach Scope Mount Gg&g, Inc. to find out where to get the best deal on Ak Quick Detach Scope Mount Gg&g, Inc..

Content:

Ak Quick Detach Scope Mount Gg&g, Inc..

$0.00
Attaches to most AK variants with a built in receiver scope rail interface. Scope mounting dovetail rail meets ...

Product Description

  • Attaches to most AK variants with a built in receiver scope rail interface.
  • Scope mounting dovetail rail meets MIL-SPEC-1913.
  • The AK-ucam QD adjustable locking mechanism is shown to have 1/2moa return to zero or less when re-installed properly on to the AK scope rail.
  • QD system allows for easy attachment, removal and re-attachment.
  • The AK-ucam lever is serrated on the bottom finger pad to facilitate a secure grip when unlocking the quick detach mechanism.
  • The GG&G AK-ucam QD System is fully adjustable for a worn or out of tolerance AK side rail.
  • The scope mount is precision machined from 6061-T6 billet aluminum.
  • The AK-ucam Quick Detach mechanism is manufactured from heat treated 4130 steel.
  • All edges are smoothed and rounded for the shooter's safety.
  • Finish: Aluminum Body is Type III hard coat anodized in a non-reflective matte black finish per Mil-Spec.
  • Steel parts are manganese phosphated matte black per Mil-Spec.
  • Rail Length: 6 1/8".
  • Weight: 8.4 oz.

Light Rifle-Embedded Front Rail Mount Badger Ordnance.

$326.99
Badger Ordnance’s LR-EFR - Light Rifle Embedded Front Rail - lets you install a night vision integration system on a rifle with ...

Product Description

Enables Mounting Night Vision Systems on Rifles With Narrow Forends

Badger Ordnance’s LR-EFR - Light Rifle Embedded Front Rail - lets you install a night vision integration system on a rifle with a lightweight, narrow forend. The Badger Ordnance LR-EFR provides 7-1/2" of rail space on top, plus 5" on each side, and a 3-7/8" bottom rail for plenty of accessory mounting acreage.

  • Maximum barrel diameter at tip of the forend 1.75”
  • For use with A/N PVS-22/27 and similar systems
  • Gunsmith installation recommended

The Badger Ordnance LR-EFR is machined from 6061 T6 aluminum alloy for excellent of strength without adding unnecessary weight to the front of your rifle. Matte black hardcoat anodized finish.

Ar-15 Flattop Scope Mount B Square.

$39.99
One-piece, detachable base with see-thru integral 1 rings, raises scope over front sights. Attaches with dual thumb screws.

Product Description

Ingenious, No Gunsmithing Designs For AR-15 Flattops

One-piece, detachable base with see-thru integral 1" rings, raises scope over front sights. Attaches with dual thumb screws.


AR-15, Issue:08, Page:080
Big Book Catalog, Issue:65, Page:078
SPECS: Black-anodized aluminum. For 1" scopes.

Ultralight Cantelever Scope Mount Aero Precision.

$63.99 - $71.99
Ideal for red dot magnification systems. This design features a rigid, lightweight body, compatible with many high-end optics platforms. Fits Mil-Spec 1913 ...

Product Description

Ideal for red dot magnification systems. This design features a rigid, lightweight body, compatible with many high-end optics platforms. Fits Mil-Spec 1913 Picatinny rails. Cross-slot keyway offers excellent recoil protections. Features:

  • Designed fro AR type upper receivers
  • 6061 T6 extruded aluminum construction
  • MIL-A Type 3 black hard-coat anodized
  • Rigid and lightweight
  • Weighs 1.7 ounces


AR-15, Issue:11, Page:091
Big Book Catalog, Issue:71, Page:094

Mark 4 Integral Mounting System Leupold.

$93.99
Designed for the precision AR-15 shooter, Leupold’s IMS optic mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the ...

Product Description

Flattop-Mounted Bases With Interchangeable Modular Ring/Riser Options - Base, MOA Ringinsert and ring sold seperately

Designed for the precision AR-15 shooter, Leupold’s IMS optic mounts clamp directly to a MIL-STD 1913 Picatinny flattop rail to raise the scope and push it forward, eliminating the need for separate risers or specialized short eye relief optics. Slides into place and secures with steel crossbolts that hold tight. Aluminum, hardcoat anodized finish, matte black.

The versatile Mark 4 Integral Mounting System gives you maximum adaptability with modular components, each sold separately. The Mark 4 Base clamps securely to the rifle’s flattop rail with a pair of hex head crossbolts and accepts the 1" or 30mm scope ring insert. The ring insert unit contains both scope rings, and its position can be adjusted on the base to accommodate different eye relief requirements. The 20 MOA riser can be used instead to provide a 20 MOA picatinny rail mount.  When used with picatinny rings, it provided additional elevation for addressing long range targets without maxing out your scope's elevation. (Not compatible with Mark 4 ring inserts.)


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095
Sinclair, Issue:5B, Page:202

SPECS: Aluminum, hardcoat anodized, matte black. Steel crossbolts. 5¾" (14.6cm) long.

Direct Mounts Nightforce.

$213.00
Top Rated Supplier of Firearm Reloading Equipment, Supplies, and Tools - Colt

Product Description

Promotional Codes are not applicable to Nightforce products.


Sinclair, Issue:5B, Page:209

Aimpoint Throw Lever Ring & Mount A.r.m.s.,inc.

$124.99 - $130.99
Compact, single-ring mount for Aimpoint CompML, CompML2, CompML3, or similar red dot sight requiring a single 30mm ring. The top half of ...

Product Description

Compact, single-ring mount for Aimpoint CompML, CompML2, CompML3, or similar red dot sight requiring a single 30mm ring. The top half of the ring is machined steel for superior strength and secured by four hex-head screws (wrench included) to ensure full contact with the sight body. Spacer raises the Aimpoint Comp Mount ½" for co-witness with iron sights when mounting directly to flattop receivers. Can also be used on #22TX30 Trijicon Tri-Power Mount.


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095

SPECS: Mount -Hardcoat anodized aluminum and Parkerized steel, matte black. 2-5⁄16" (5.6 cm) long. 3.9 oz. (109 g) wt. Spacer – Aluminum, hardcoat anodized, matte black. 2.3" (58mm) long, .54"(13 mm) high. 1 oz. (28g) wt. Mounting screws included.

Skulptured Bases S&k.

$42.99 - $43.99
S&K SKulptured Bases are handmade in their plant in the Pennsylvania hills by local craftsman who are proud of their work! There ...

Product Description

Light, Cutaway Bases

S&K SKulptured Bases are handmade in their plant in the Pennsylvania hills by local craftsman who are proud of their work! There is no other all steel mount stronger or lighter! (Average weight of complete all steel mount – 2 bases and 2 rings – is 3 oz! Windage is provided in both front and rear base and their patented Smooth Kontour rings are the easiest of all rings to install. Laboriously machine them Virgin Bar stock, these SKulptured Bases crisp, clean lines complement the finest rifles in the world. Bases only, rings need to be purchased separately.


Big Book Catalog, Issue:71, Page:268

Ac-30 Accucam Quick Detach Scope Mount Gg&g, Inc..

$205.99
In order to provide the shooter with the ability to gain more eye relief, GG&G has introduced the AC-30 Accucam QD Mounting ...

Product Description

In order to provide the shooter with the ability to gain more eye relief, GG&G has introduced the AC-30 Accucam QD Mounting Base With Integral 30mm Scope Rings. This mounting base is tall enough to provide clearance for the latest large objective lens-long range optics. The integrated Accucam Quick Detach Lever System provides the shooter with the ability to quickly remove the scope in order to utilize other optics as the mission may require, and have the confidence of 1/2 MOA repeatability upon reinstallation.

The overall length of the AC-30 Accucam QD Scope Mounting Base is five inches. The mounting base portion is four inches in length and with its skeletonized construction weighs only six ounces. The inside ring to inside ring dimension is 3 3/4 inches.

Designed and manufactured to meet the rigors of combat and professional use, the AC-30 QD Mounting Base is manufactured from solid billet 6061 T6 aluminum alloy and has a Type III hard coat anodized matte black mil-spec finish. All edges of the quick detach scope mount have been dehorned to protect the operator. The base can be quickly installed on a dovetail rail in seconds by rotating the Accucam Cam Lever to the locked position. It can then be quickly removed by rotating the Accucam Cam Lever to the unlocked position. Not recommended for .50 BMG or lightweight machine guns.

If you are using a 1" scope consider adding Delrin Ring Reducers (084-000-091) to your order.


AR-15, Issue:11, Page:092
Big Book Catalog, Issue:71, Page:095